Debugging of color sorter
You are here: Home » News » color sorter » Debugging of color sorter

Debugging of color sorter

Views:0     Author:Site Editor     Publish Time: 2021-04-27      Origin:Site

The color sorter is a device that uses photoelectric detection technology to automatically sort out heterochromatic particles in granular materials according to the differences in the optical characteristics of the materials. Most color sorters are used in the fields of bulk materials or packaging industrial products, food quality inspection and grading. The debugging of the color sorter does not need to follow the steps, just complete the following items.

 

1. Check whether the valve is completed, whether the nozzle sequence is correct, adjust the position of the machine, and check whether the air pressure is normal.

2. Adjust the machine level and check whether the air pressure is normal.

3. Adjust the screw of the vibrator, the pressure reducing plate, check the position of the instrument channel and the mouthpiece, and adjust the position of the camera after completion.

4. Check whether the lamps are all on, and perform manual cleaning to see if the cleaning is normal.

5. Adjust the delay, width, background plate, sensitivity and output.

6. Make sure that the glass and the background plate are clean, whether the path of the cutting observation instrument is jumping, whether the path of the cutting material is jumping (no matter what material, there is a jumping phenomenon), and adjust the position of the background plate and the glass plate. Check whether the wire connections of the electric control box are loose and whether the original checkboxes are intact, and then fix and correctly connect the live wire, neutral wire, and ground wire of the stabilized power supply.

7. Check whether all circuit connectors in the electric control box are loose, check whether the originals in the sorting box are intact, and then fix and correctly connect the live, neutral, and ground wires of the stabilized power supply.

 

The delay function of the color sorter is to blow out the inferior products from the nozzle for a period of time, but at this time, high-quality materials cannot be obtained. The result is that only secondary material is blown. If the delay is incorrect, too much good material will be blown out of the secondary material, and the color of the whole machine is not clean.

 

What is color high and its function?

 Answer: The selection rate, the smaller the number, the higher the accuracy.

What are the low gray level and its function? 

Answer: Choose black, the larger the number, the better the accuracy.

What are the color spot and its effect?

Answer: Choose yellow. The larger the number, the smaller the accuracy.

What is high saturation and effect?

Answer: Choose yellow. The smaller the number, the higher the accuracy.

What is a monochromatic spot and its effect? 

Answer: Choose black. The larger the number, the lower the accuracy.

 

The higher the separation rate and extraction rate of the three elements, the better the color sorter; the lower the extraction rate, the better the color classifier, and the higher the output, the better the color classifier. When buying, you should consider these three factors and choose the best ratio that suits you. Manshan Powaer Trading Co., Ltd. provides a wide range of products to meet diversified needs. And for more than ten years, we have adhered to the business policy of "Quality First, Customer First".


Click To Send Your Quote

Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first " since the establishment of the company and always do our best to...

Quick Links

Products

Contact us

Contact Us

  0086 15805511232
 rachelleetvxq@gmail.com
  Cross-border e-commerce industrial park, comprehensive bonded zone, Zhengpugang New District, Maanshan City, Anhui Province
Copyright©2021 Manshan Powaer Trading Co.,Ltd. Support By Leadong    .Sitemap