How To Place A Order?
Inquiry> Drawing> Quote> Sample making> Sample confirm> Produce> Delivery
1.Inquiry:Let us know your requirements or application.
2.Drawing:You can send us drawing or sample
3.Quote:we quote according to your requirements or our suggestions.
4.Sample making:We make the sample and send it to you
5.Sample confirm:You confirms the samples and places deposit for formal order.
6.Produce:we arrange the production.
7.Delivery:We deliver the products to you
Lead Time:
| Quantity(Pieces) | 1-50 | 51-300 | >300 |
| Est. Time(days) | 7 | 14 | To be negotiated |
High Pressure Water Mist Nozzle Model list:
| Serial number | Model number | Type | K Factor | working pressure(Mpa) | Connector thread(Custom) | Number of nozzles |
| 1 | XSW-TQ0.3/10 | Open/Closed | 0.3 | 10Mpa-14Mpa | M18*1.5/G1/2 | 5/6/7Pcs |
| 2 | XSW-TQ0.5/10 | Open/Closed | 0.5 | 10Mpa-14Mpa | M18*1.5/G1/2 | 5/6/7Pcs |
| 3 | XSW-T0.7/10 | Open/Closed | 0.7 | 10Mpa-14Mpa | M18*1.5/G1/2 | 5/6/7Pcs |
| 4 | XSW-T0.8/10 | Open/Closed | 0.8 | 10Mpa-14Mpa | M18*1.5/G1/2 | 5/6/7Pcs |
| 5 | XSW-T0.9/10 | Open/Closed | 0.9 | 10Mpa-14Mpa | M18*1.5/G1/2 | 5/6/7Pcs |
| 6 | XSW-T1.0/10 | Open/Closed | 1.0 | 10Mpa-14Mpa | M18*1.5/G1/2 | 5/6/7Pcs |
| 7 | XSW-T1.2/10 | Open/Closed | 1.2 | 10Mpa-14Mpa | M18*1.5/G1/2 | 5/6/7Pcs |
| 8 | XSW-T1.5/10 | Open/Closed | 1.5 | 10Mpa-14Mpa | M18*1.5/G1/2 | 5/6/7Pcs |
| 9 | XSW-T1.7/10 | Open/Closed | 1.7 | 10Mpa-14Mpa | M18*1.5/G1/2 | 5/6/7Pcs |
| 10 | XSW-T2.0/10 | Open/Closed | 2.0 | 10Mpa-14Mpa | M18*1.5/G1/2 | 5/6/7Pcs |
| 11 | XSW-T2.5/8 | Open/Closed | 2.5 | 10Mpa-14Mpa | M18*1.5/G1/2 | 5/6/7Pcs |
| 12 | XSW-T3.0/8 | Open/Closed | 3.0 | 10Mpa-14Mpa | M18*1.5/G1/2 | 5/6/7Pcs |
| 13 | XSW-T3.5/8 | Open/Closed | 3.5 | 10Mpa-14Mpa | M18*1.5/G1/2 | 5/6/7Pcs |
| 14 | XSW-T4.0/5 | Open/Closed | 4.0 | 10Mpa-14Mpa | M18*1.5/G1/2 | 5/6/7Pcs |
| 15 | XSW-T4.5/5 | Open/Closed | 4.5 | 10Mpa-14Mpa | M18*1.5/G1/2 | 5/6/7Pcs |
| 16 | XSW-T5.0/5 | Open/Closed | 5.0 | 10Mpa-14Mpa | M18*1.5/G1/2 | 5/6/7Pcs |
| 17 | XSW-T5.5/5 | Open/Closed | 5.0 | 10Mpa-14Mpa | M18*1.5/G1/2 | 5/6/7Pcs |
1. How long does it take to receive samples?
a) Pattern:30-45days after order
b) Sample:30days after pattern finishing.
c) The lead time is the general production period and does not include the transportation time.
2. Can we visit the factory to conduct an audit?
Yes, you are welcome to visit our partner factory by prior agreement.
Very fine droplet size, Class I water mist
Major parts include nozzle body, nozzle tips, whirl core, spray orifice, strainer mesh
High spray momentum, the good ability for penetration of fire
Very fine atomizing droplets, Good dispersion effect
Fog-like droplets remain in the air for a long time
Spray pattern: Full Cone
Spray angles: 120°(other angles optional)
Operating pressure:10~14Mpa
Strainer: 40 mesh, 120 mesh, 200 mesh
Class, I water mist: Dv0.5≤100μ, Dv0.99<200μ
K-factors of open type: 0.17, 0.45, 0.95, 1.34, 2.04, 1.19, 1.87.
K-factors of closed type: 1.25, 1.68, 2.04, others can be customized.
content is empty!
Home Products Application About Us Service Resource Contact Us