Solution for clogging of water mist nozzle

The centrifugal water mist nozzle of the water mist nozzle, the water flow rotates rapidly under the action of the tangential direction of the flow channel and sprays from the nozzle hole to achieve the atomization effect. The nozzle has the characteristics of suitable mist flow diameter and large mist kinetic energy. The nozzle has a filter. When the water mist nozzle is blocked, how to solve it, you can start from the following aspects

1. Installation problems cause the water mist nozzle to block

2. Corrosion and wear cause the water mist nozzle to block

3. Adhesion causes the water mist nozzle to block

4.the temperature damage causes the water mist nozzle to block

5.the nozzle blockage causes the water mist nozzle to block

Installation problems cause the water mist nozzle to block

The installation error of the water mist nozzle will bury the hidden danger of the water mist nozzle. For example, when the water mist nozzle is installed, the gasket is off-axis, or the water mist nozzle is installed too tightly, and the spray effect of the water mist nozzle cannot be achieved. Expected goal. The installation problem can be solved by the second installation after disassembly. If the installation causes damage to the water mist nozzle, the water mist nozzle should be replaced.

Corrosion and wear cause clogging of the water mist nozzle

With the delay of working time, the water mist nozzle will gradually be corroded or worn by the bath liquid. After the water mist nozzle is corroded or worn, the surface and internal flow passage of the nozzle will gradually deform or increase, which will affect the flow rate. The water mist nozzle is difficult to repair after being damaged due to corrosion and wear, and a good water mist nozzle should be replaced immediately.

Adhesion causes the water mist nozzle to block

After the long-term operation of the water mist nozzle, or when the treated bath liquid accelerates to evaporate due to various reasons, splashing, atomization and other effects may cause the water mist nozzle to remain on the inner and outer edges of the mouth. And chemical accumulation. The dry solidified layer will cause the water mist nozzle or internal flow channel to block. You can ask maintenance personnel to remove it.

Temperature damage causes the water mist nozzle to block

If the water mist nozzle is operated in an environment higher than the rated temperature for a long time, it will be damaged due to high temperatures, such as the deformation of the water mist nozzle or the spray shape. If the water mist nozzle is damaged due to high temperature, it means that the water mist nozzle of this material is not suitable for the working environment at the time, and the water mist nozzle should be replaced in a planned way to avoid unnecessary economic losses.

Blocked nozzles cause clogged water mist nozzles

During the long-term spraying process of the water mist nozzle, the dirt and impurities in the tank liquid will gradually accumulate in the nozzle or internal flow pipe of the water mist nozzle. After the water mist nozzle is blocked, the flow rate of the water mist nozzle will gradually decrease, thereby affecting the working pressure, spray shape and uniformity of liquid particles of the water mist nozzle. It should be repaired and dredged immediately. If the blockage is serious, you need to replace it with a new water mist nozzle.

Since its establishment, Manshan Powaer Trading Co., Ltd has been doing its best to meet the potential needs of customers. Adhere to the business policy of "Quality First, Customer First".If you want to know more about our professional Spray Nozzle and Water Mist Nozzle products, you can contact us at any time.